Standardising Auxiliary Data

Auxiliary data provide supplementary or additional information to items and include

• Country Structure,
• Assistance classification,
• Cause classification,
• Needs classification,
• Ordnance classification,
• Organisation,
• Place.

Tasks are not included in neither items or auxiliary data.

It is important to standardise the Auxiliary data i.e. ensure that duplicates with different spellings are not created and that official classifications for the Mine Action Programme / country are used in IMSMA^NG. Therefore it is important to limit the number of users who have permission to change Auxiliary Data. As with all objects in IMSMA^NG, it is possible to add Custom Defined Fields ( CDFs) to the Auxiliary Data.

Contents

Country Structure

The Country Structure represents a gazetteer, the political or administrative divisions within a country. In IMSMA^NG, the Country Structure allows a Mine Action Programme to link Mine Action information to areas and report statistics such as number of victims per province or district. The Country Structure should be set up before beginning data entry.

Ideally, a Mine Action Programme uses an official, countrywide Country Structure that ensures mine action information is compatible with other national datasets. Setting up Country Structure in IMSMA^NG is done in two steps:

1. defining the levels of the Country Structure
2. defining the nodes of the Country Structure

Define the Country Structure Levels

How To
Add levels Edit levels Delete levels

Defining the levels of the Country Structure includes defining the number of levels and the names of the levels. For Country Structure the maximum number of levels are seven.

Example Country Structures

Ideally, the Country Structure in IMSMA^NG, covers all levels of the existing Country Structure, from the country level down to a level that can be represented with a single point such as a town or village. If a Mine Action programme has special levels such as Areas of Responsibility that do not exists in the Country Structure, artificial levels may be inserted into the Country Structure in IMSMA^NG.

Define the Country Structure Nodes

How To
Add Country Structure View and/or edit Country Structure Delete Country Structure

To display a Country Structure node like a town or village on the map, it is necessary to add a geographic coordinate for the node.

If information such as population, numbers of families and infrastructure information that is helpful in planning Mine Action activities, this information may be collected and tracked either as CDFs to either Country Structure or Location.

It is possible to add Country Structure as CDF to other items but should not be used instead of / duplication of reconciling to Location.

If the map extent is set IMSMANG automatically zoom and centre the map when the user clicks in the Country Structure pane in the Main Navigation window. For ease of reporting, it is recommended to associate the majority of the Locations with one of the levels in the Country Structure, normally the lowest level such as town or village. Alternative names may be in different languages and alphabets. It is also common to add P-code as an alternative name. It is important to keep the Country Structure inside IMSMANG in synch with the official Country Structure.

In order to facilitate updates of the Country Structure, the Country Structure ID has been made visible. Contact your GICHD IM advisor if you would like to update your Country Structure.

Assistance, Cause and Needs classifications

These classifications are used in Assistance and Victim items.

• Cause for someone having become a victim
• Needs that the victim is assessed to have
• Assistance that the victim has received

They are as the Country Structure tree structures and should be set up before beginning data entry.

Ideally, a Mine Action Programme uses official, countrywide classifications that ensures mine action information is compatible with other national datasets. Implementing these classifications requires two steps:

1. defining the levels of the classifications
2. defining the nodes of the classifications

Define the Classifications Levels

How To
Add levels Edit levels Delete levels

IMSMA^NG contains a set of pre-defined levels of classifications. These should be seen as a starting point for discussions in each Mine Action and/or Assistance Programme.

	Cause	Needs	Assistance
Level 1	Cause	Needs	Assistance
Level 2	Event	Phase	Phase
Level 3	Type	Type	Type
Level 4	Subtype	Subtype	Subtype
Level 5	Specification	Specification	Specification
Level 6	Detail	Detail	Detail

These classifications may have maximum of ten levels.

Define the Classifications

How To
Add Assistance Classification Add Cause Classification Add Needs Classification View and/or edit classifications Delete classifications

IMSMA^NG contains a set of pre-defined classifications. These should be seen as a starting point for discussions in each Mine Action and/or Assistance Programme. They may be as Excel files here.

Contact your GICHD IM advisor if you need help with adjusting levels or classifications.

Define Other Auxiliary Data

In addition to establishing the Assistance classification, Cause Classification, Country Structure and Needs classifications in IMSMA^NG, information managers can establish other Auxiliary data, including data for:

• Ordnance Classification
• Organisations
• Places

While this information is easily updated during operational use of IMSMA^NG, it is helpful to establish a baseline of information prior to proceeding with Data Entry Form template design and data entry. Many IMSMA^NG users already have a baseline set of information created for each of the Auxiliary data types, either through the standard, predefined data available within IMSMA^NG or by migrating auxiliary data from a previous IMSMA version.

Ordnance Classification

This classification is used in Land, Activities and Accidents. IMSMA^NG includes from the installation more than 5,000 predefined ordnance models.

How To
Ordnance Classification List window Filter Ordnance Classification Add Ordnance Classification View and/or edit Ordnance Classification Delete Ordnance Classification

All ordnance is grouped according to categories and subcategories. For example, an ordnance may have a category of “Landmine” and a subcategory of “Antipersonnel.” In this way, IMSMA^NG provides the ability not only to search and report on models but summarise information on categories and subcategories. This allows queries such as “how many landmines or bombs were cleared in a specific period?” or “how many anti-personnel mines were found?”.

Other categories than Landmines have ordnance that belong to the subcategory Anti-Personnel so if you only want to report on AP-mines you need to filter on both category and subcategory.

Furthermore, programmes can limit which ordnance can be used for data entry by making ordnance inactive. To making only the ordnance that may be found in the country facilitates both data entry and data quality.

Before beginning data entry, standardise the ordnance available for use to ensure data consistency of reports. When adding an ordnance to the database, determine if the ordnance already exists in IMSMANG and the correct classification.

IED, Less-lethal weapons, Light weapons, MANPADS, Small Arm Ammunitions and Small Arms are new Categories. The new models belonging to the above categories are Inactive. The new field Statistic Group has been added in order to facilitate flexible reporting.

If the new field Statistic Group is not used the below table shows how category, subcategory and model name may be used as grouping criteria for statistics by ordnance.

Grouping	Criteria
AP	Category = Landmines AND Subcategory = AP
AV	Category = Landmines AND Subcategory = AT
Country specific e.g. Roadside, Anti-group, Trip-ware	1-10 models
Cluster	Category = Scatterable munitions + Clusters and dispensers
IED	Category = IED
UXO	Category = Bombs + Grenades + Guided Missiles + Projectiles + Rockets
SALW	Models from the other categories + SALW Categories
UNK	Category = Unknown
Other	Category = Pyrotechnics and Flares + Misc Nonexplosive Devices + Misc Explosive Devices + Naval Mines

Organisations

How To
Organisation List window Filter Organisatons Add Organisation View and/or edit Organisations Delete Organisations

IMSMA^NG provides the ability to track information about Organisations participating in Mine Action. Organisations can be categorised by type and assigned “work areas” based on the Country Structure. To display Organisations on the map, they must have geospatial data (minimum one set of coordinates).

Additionally, IMSMA^NG supports the creation of parent-child relationships with organisations so that information managers can create hierarchies of organisations. For example, a mine clearance organisation may be responsible for several clearance teams within a country. As shown in the figure below, this relationship can be mapped by creating one organisation for the mine clearance organisation (NGO1) and one organisation for each team (TeamA, TeamB and TeamC), then specifying the parent organisation of each team as NGO1.

Example Hierarchy of Organisations

This kind of hierarchical relationship allows for complex searching and reporting on information such as how many square meters were cleared by each team and the total square meters that were cleared by the entire organisation.

IMSMA^NG also supports the tracking of competencies and accreditations for each organisation.

It is possible to add Organisation as CDF to other items.

The Organisation IMSMA is normally used for indicating that the Data Entry Form template is general i.e. not a special made template for one organisation.

Places

IMSMA^NG offers the option to track information about specific places or infrastructure elements within a country that are relevant to Mine Action. These can be ammunition storages, armouries, airports, community centres, hospitals, refugee camps or any other structures/buildings which designate a political, economic, social, and/or logistical value.

How To
Place List window Filter Places Add Place View and/or edit Places Delete Places

Places can be linked to:

• Land and Activities to represent the nearest medical facilities
• Land and Activities to represent ammunition storage or armoury
• Victim to represent hospital
• Assistance to represent Place where the Assistance took place
• Education activities to represent the location of the activity

As with other IMSMA^NG data, Places can be represented on the map by adding geospatial information. It is possible to add Place as CDF to other items.

Ammunition storage and Armoury have been added to Place Type

Import Auxiliary Data

To import auxiliary data using an Excel spreadsheet, refer to XLS import.