View source for Manual Geospatial Data Entry

{{TOC right}}
There are two different types of coordinates:
* absolute i.e. you know the coordinates
* relative means that instead of entering coordinates, you use the distance and bearing '''from''' an absolute point.

==How to Manually Add coordinates for Point data ==__NOEDITSECTION__
To manually add geospatial data for a point: 
<ol>
<li>Click the [[Image:FieldTemplateIcon.png]] button above the Points table of the Point and Polygon/Polyline List window.

[[Image:PointandPolyListWindow.png|500px|center]]</li>
<li>From the Point window, enter the point number in the Point No. field. Note that this is a required field.

{{note|The fields available in the Points window will depend on the coordinate reference system that you selected.}}

[[Image:DiffPointWindows.png|center|500px|''Different Point Windows'']]
<div align="center">
''Different Point Windows''
</div></li>
<li>Select the type of point that you are defining in the [[Point Types|'''Point Type''']] field.</li>
<li>Enter the local identifier for the point in the '''Point ID''' field. Note that this is a required field.</li>
<li>Do one of the following:</li>
*To enter an absolute point, enter the coordinates in either the '''X/Longitude''' and '''Y/Latitude''' fields, or the '''MGRS''' field.
*To enter a relative point:
<ol type="a">
<li>Enter the distance of the point from the absolute point in the '''Distance''' field.</li>
<li>Enter the bearing of the point relative to the absolute point in the '''Bearing''' field.</li>
<li>Select the point from which the distance and bearing are defined from the '''From Point''' list.</li>
</ol>
<li>Enter a description for the point in the '''Point Description''' field.</li>
<li>The three buttons have the following functions:</li>
'''OK''' button will save the point and close the Point window.

'''Apply''' button will save the point, keep the Point window open and update the contents which is convenient when you would like to add more points.

'''Cancel''' button will close the Point window without saving the point data.
</ol>

If you entered a relative point, the coordinates for the point are calculated based on the distance and bearing that you entered. 


When you have finished entering geospatial data, click the [[Image:PreviewPoints.png]] button and preview on the background map that the coordinates are in the '''correct''' part of the country, on the correct side of the road, etc.

==How to Manually Add Polygon and Polyline Points==__NOEDITSECTION__
{{Warning| It is very important to enter points of polygons or polylines in the order they should be drawn in.}}

To manually add geospatial data for a polygon or polyline: 
<ol>
<li>Click the [[Image:FieldTemplateIcon.png]] button above the Polygon and Polyline Points table of the Point and Polygon/Polyline List window.
[[Image:PointandPolyListWindow.png|500px|center]]</li>
<li>The Polygon/Polyline Editor window displays. 
[[Image:Polyline Points 2.png|500px|center]]</li>
<li>Enter the identifier for the polygon or polyline in the Polygon/Polyline Shape ID field.</li>
<li>Select either the Polygon or Polyline option from the Type field.</li>
<li>Select Poly Property</li>
<li>Click the [[Image:FieldTemplateIcon.png]] button.
:The Point window displays. 

{{note|The fields available in the Points window will depend on the coordinate reference system that you selected.}}

[[Image:DiffPointWindows.png|center|500px|''Different Point Windows'']]
<div align="center">
''Different Point Windows''
</div></li>

<li>From the Point window, enter the point number in the Point No. field. Note that this is a required field.</li>
<li>Select the type of point that you are defining in the [[Point Types|'''Point Type''']] field.</li>
<li>Enter the local identifier for the point in the '''Point ID''' field. Note that this is a required field.</li>
<li>Do one of the following:</li>
*To enter an absolute point, enter the coordinates in either the '''X/Longitude''' and '''Y/Latitude''' fields, or the '''MGRS''' field.

*To enter a relative point:
<ol type="a">
<li>Enter the distance of the point from the absolute point in the Distance field.</li>
<li>Enter the bearing of the point relative to the absolute point in the Bearing field.</li>
<li>Select the point from which the distance and bearing are defined from the From Point list.</li>
</ol>
<li>Normally only points like Benchmark and Reference points have descriptions.</li>
<li>The three buttons have the following functions:</li>
'''OK''' button will save the point and close the Point window.

'''Apply''' button will save the point, keep the Point window open and update the contents which is convenient when you would like to add more points.

'''Cancel''' button will close the Point window without saving the point data.
</ol>

If you entered a relative point, the coordinates for the point are calculated based on the distance and bearing that you entered. 


When you have finished entering geospatial data, click the [[Image:PreviewPoints.png]] button and preview on the background map that the coordinates are in the '''correct''' part of the country, on the correct side of the road, etc.

{{NavBox HowTo Enter Data}}
[[Category:CRI]]