Difference between revisions of "Manual Geospatial Data Entry"

From IMSMA Wiki
Jump to: navigation, search
Line 1: Line 1:
 
{{TOC right}}
 
{{TOC right}}
 
==How to Manually Add coordinates for Point data ==__NOEDITSECTION__
 
==How to Manually Add coordinates for Point data ==__NOEDITSECTION__
[[Image:PointandPolyListWindow.png|500px|center]]
 
 
To manually add geospatial data for a point:  
 
To manually add geospatial data for a point:  
 
<ol>
 
<ol>
<li>Click the [[Image:FieldTemplateIcon.png]] button above the Points table of the Point and Polygon/Polyline List window.</li>
+
<li>Click the [[Image:FieldTemplateIcon.png]] button above the Points table of the Point and Polygon/Polyline List window.
<li>From the Point window, enter the point number in the Point No. field. Note that this is a required field.</li>
+
 
</ol>
+
[[Image:PointandPolyListWindow.png|500px|center]]</li>
 +
<li>From the Point window, enter the point number in the Point No. field. Note that this is a required field.
  
 
{{note|The fields available in the Points window will depend on the coordinate reference system that you selected.}}
 
{{note|The fields available in the Points window will depend on the coordinate reference system that you selected.}}
Line 13: Line 13:
 
<div align="center">
 
<div align="center">
 
''Different Point Windows''
 
''Different Point Windows''
</div>
+
</div></li>
 
 
<ol start="3">
 
 
<li>Select the type of point that you are defining in the [[Point Types|'''Point Type''']] field.</li>
 
<li>Select the type of point that you are defining in the [[Point Types|'''Point Type''']] field.</li>
 
<li>Enter the local identifier for the point in the '''Point ID''' field. Note that this is a required field.</li>
 
<li>Enter the local identifier for the point in the '''Point ID''' field. Note that this is a required field.</li>
Line 36: Line 34:
 
*To close the Point window without saving the point data, click the '''Cancel''' button.
 
*To close the Point window without saving the point data, click the '''Cancel''' button.
 
</ol>
 
</ol>
 
  
 
==How to Manually Add Polygon and Polyline Points==__NOEDITSECTION__
 
==How to Manually Add Polygon and Polyline Points==__NOEDITSECTION__

Revision as of 10:27, 16 February 2015

How to Manually Add coordinates for Point data

To manually add geospatial data for a point:

  1. Click the FieldTemplateIcon.png button above the Points table of the Point and Polygon/Polyline List window.
    PointandPolyListWindow.png
  2. From the Point window, enter the point number in the Point No. field. Note that this is a required field.
    Note.jpg The fields available in the Points window will depend on the coordinate reference system that you selected.
    Different Point Windows

    Different Point Windows

  3. Select the type of point that you are defining in the Point Type field.
  4. Enter the local identifier for the point in the Point ID field. Note that this is a required field.
  5. Do one of the following:
    • To enter an absolute point, enter the coordinates in either the X/Longitude and Y/Latitude fields, or the MGRS field.
    Note.jpg Absolute points are those points for which you know the coordinates. Relative points are those points for which you may not know the coordinates, but you do know the distance and bearing from an absolute point.
    • To enter a relative point:
    1. Enter the distance of the point from the absolute point in the Distance field.
    2. Enter the bearing of the point relative to the absolute point in the Bearing field.
    3. Select the point from which the distance and bearing are defined from the From Point list.
  6. Enter a description for the point in the Point Description field.
  7. Do one of the following:
    • To save the point and close the Point window, click the OK button.
    If you entered a relative point, the coordinates for the point are calculated based on the distance and bearing that you entered.
    • To save the point and continue adding more points, click the Apply button.
    • To close the Point window without saving the point data, click the Cancel button.

How to Manually Add Polygon and Polyline Points

Warning.jpg It is very important to enter points of polygons or polylines in the order they should be drawn in.
PointandPolyListWindow.png

To manually add geospatial data for a polygon or polyline:

  1. Click the FieldTemplateIcon.png button above the Polygon and Polyline Points table of the Point and Polygon/Polyline List window.
  2. The Polygon/Polyline Editor window displays.
    Polyline Points 2.png
  3. Enter the identifier for the polygon or polyline in the Polygon/Polyline Shape ID field.
  4. Select either the Polygon or Polyline option from the Type field.
  5. Click the FieldTemplateIcon.png button.
  6. The Point window displays.
    Note.jpg The fields available in the Points window will depend on the coordinate reference system that you selected.
    Different Point Windows

    Different Point Windows

  7. From the Point window, enter the point number in the Point No. field. Note that this is a required field.
  8. Select the type of point that you are defining in the Point Type field.
  9. Enter the local identifier for the point in the Point ID field. Note that this is a required field.
  10. Do one of the following:
    • To enter an absolute point, enter the coordinates in either the X/Longitude and Y/Latitude fields, or the MGRS field.
    Note.jpg Absolute points are those points for which you know the coordinates. Relative points are those points for which you may not know the coordinates, but you do know the distance and bearing from an absolute point.
    • To enter a relative point:
    1. Enter the distance of the point from the absolute point in the Distance field.
    2. Enter the bearing of the point relative to the absolute point in the Bearing field.
    3. Select the point from which the distance and bearing are defined from the From Point list.
  11. Enter a description for the point in the Point Description field.
  12. Do one of the following:
    • To save the point and close the Point window, click the OK button.
    If you entered a relative point, the coordinates for the point are calculated based on the distance and bearing that you entered.
    • To save the point and continue adding more points, click the Apply button.
    • To close the Point window without saving the point data, click the Cancel button.