NoPublic, bureaucrat, administrator
6,632
edits
Changes
no edit summary
;APMBC: [http://www.apminebanconvention.org/ Anti-Personnel Mine Ban Convention]
;ArcGIS: It is a software suite developed by ESRI Inc. IMSMA incorporates the ArcGIS Engine to display the geographical data in the map pane
;[[Auxiliary Data]]: Additional Auxiliary data that should be defined before provide supplementary or additional information to the main items/objects in IMSMA. Auxiliary data entering. These include organisationsis of the following types in IMSMA: Country structure, Organisation, placesPlace, ordnance Ordnance classification, cause Cause classification, needs Needs classification, assistance and Assistance classification. ;AXO: Abandoned Explosive Ordnance , explosive ordnance that has not been used during an armed conflict, that has been left behind or dumped by a party to an armed conflict, and which is no longer under control of the party that left it behind or dumped it. Abandoned explosive ordnance may or may not have been primed, fuzed, armed or otherwise prepared for use. (CCW protocol V)
==B==__NOEDITSECTION__
;[[Point Types | Benchmark]]: is a fixed point of reference used to locate a marked and recorded hazard or hazardous '''area'''. It should normally be located a short distance outside the hazardous area. It should be safe to walk from the Reference / Landmark to the Benchmark.
==C==__NOEDITSECTION__
;CCM: [http://www.clusterconvention.org/ Convention on Cluster Munitions]
;CCW: [https://www.icrc.org/applic/ihl/ihl.nsf/INTRO/500?OpenDocument Convention on Certain Conventional Weapons]
;CDF: [[Custom Defined Fields ]] are fields that IMSMA allows you to create, change, remove and are not predefinedfields for country specific needs.
;Centroid: The geometric center of a feature. For line, polygon, or three-dimensional features, it is the center of mass (or center of gravity) and may fall inside the feature or outside the feature.
;CHA: Confirmed Hazardous Area , refers to an area where the presence of mine/ERW contamination has been confirmed on the basis of direct evidence of the presence of mines/ERW.
;CRPD: [http://www.un.org/disabilities/ Convention on the Rights of Persons with Disabilities]
==D==__NOEDITSECTION__
;[[Data Categories | Data Category]]: The Data Inventory Manager allows you to organise item attributes into meaningful groupings, or data categories. ;[[Using Data Entry Forms|Data Entry Form]]: Data entry forms are used to collect mine action data such as accidents and victims, land, activities, locations, education activities, and quality management information and display them in a standardised format. They used to be called Field Reports.;[[Data Entry Form TemplateTemplates]]: They arepredefined are forms that can be are used to add a Data Entry Form to for adding data IMSMA. Templates are created by IMSMAadministrators.;[[Data Inventory Manager]]: Using Data Inventory Manager, information managers can create new data elements or modify existing elements to map to their programme’s information needs.
;Derived field: a field that is calculated from another object
==E==__NOEDITSECTION__
;EOD: Explosive Ordnance Disposal, the detection, identification, evaluation, render safe, recovery and disposal of explosive ordnance.;ERW: Explosive Remnants of War, includes landmines, Unexploded Ordnance (UXO) and Abandoned Explosive Ordnance (AXO).;[[Point Types | Evidence point]]: is used for Cluster munitions and other UXO. It is used for recording where ordnance are found i.e. a strong claim with high confidence
==F==__NOEDITSECTION__
;IM: Information Management
;IMSMA: Information Management System for Mine Action
;IMSMA Legacy: refers to IMSMA version 1 - 3
;IMSMA NG: IMSMA New Generation, refers to IMSMA version 4 - 6 and should be written {{IMSMANG}}
;IMAS: [http://www.mineactionstandards.org/ International Mine Action Standards]
;Items: There are three different type of items in IMSMA:
# [[LocationSummary Window | Location]], # [[Task Tab | Task]] # [[LandSummary Window | Land]], [[ActivitySummary Window | Activity]], [[Accident Summary Window | Accident]], [[Victim Summary Window | Victim]], [[AssistanceSummary Window | Assistance]], [[Education Summary Window | Education]] and [[QMSummary Window | QM]]. :They can be viewed in the [[Items Pane ]] of the [[IMSMA Navigation window]].
==J==__NOEDITSECTION__
==L==__NOEDITSECTION__
;[[Point Types | Landmark]]: is a fixed point of reference some distance outside the hazardous '''area''. It should be an easily recognised feature (such as a cross-roads or a bridge) which can be used to assist in navigating to one or more benchmarks.
==M==__NOEDITSECTION__
;maXML: [[XML Documentation | Mine Action Extensible Markup Language]];MBT: Mine Ban Treaty, another acronym for APMBC [http://www.apminebanconvention.org/ Anti-Personnel Mine Ban Convention]
;MGRS: Military Grid Reference System (MGRS)is the geocoordinate standard used by NATO for locating points on the earth. The MGRS is derived from the Universal Transverse Mercator (UTM) grid system and the universal polar stereographic (UPS) grid system, but uses a different labelling convention. The MGRS is used for the entire earth. An example of an MGRS coordinate, or grid reference, would be 4QFJ12345678, which consists of three parts:
: '''4Q''' (grid zone designator, GZD)
: '''FJ''' (the 100,000-meter square identifier)
: '''12345678''' (numerical location; easting is 1234 and northing is 5678, in this case specifying a location with 10 m resolution).
;[[MINT]]: Mine action INTelligence tool;MIQ: Mine action Information management Qualification, old term for the different levels of '''[[Portal:Training | IMSMA training]]'''
==N==__NOEDITSECTION__
;[[IMSMA Navigation Window | Navigation Window]]:The IMSMA Navigation window is the main window from which all of IMSMA’s features are accessed. The window contains a menu toolbar, a status bar, and three panes: the country structure pane, map pane, and items pane. ;NMAS: National Mine Action Standardsbut could also refer to National Mine Action Strategy.
;Notification area: a notification area (also system tray or status area) is the portion of the user interface that displays icons for system and program features that have no presence on the desktop as well as the time and the volume icon. It contains mainly icons that show status information, though some programs, use it for minimized windows. By default, this is located in the bottom-right of the primary monitor (or bottom-left on languages of Windows that use right-to-left reading order), or at the bottom of the taskbar if docked vertically.
;Novetta Solutions: The company currently contracted for IMSMA software development
;NTS: Non-Technical Survey, refers to the collection and analysis of data, without the use of technical interventions, about the presence, type, distribution and surrounding environment of mine/ERW contamination, in order to define better where mine/ERW contamination is present, and where it is not, and to support land release prioritisation and decision-making processes through the provision of evidence.
==O==__NOEDITSECTION__
==R==__NOEDITSECTION__
;[[Point Types | Reference point]]: is a fixed point of reference some distance outside the hazardous '''area'''. It should be an easily recognised feature (such as a cross-roads or a bridge) which can be used to assist in navigating to one or more benchmarks.
==S==__NOEDITSECTION__
;SADD: Sex- and Age-Disaggregated Data
;SHA: Suspected Hazardous Area. refers to an area where there is reasonable suspicion of mine/ERW contamination on the basis of indirect evidence of the presence of mines/ERW.;SOPSOPs: Standard Operating Procedures, instructions which define the preferred or currently established method of conducting an operational task or activity. Their purpose is to promote recognisable and measurable degrees of discipline, uniformity, consistency and commonality within an organisation, with the aim of improving operational effectiveness and safety. SOPs should reflect local requirements and circumstances.
;Subobject: Subobjects are subcategories within certain IMSMA items (land, activity, accident, victim, education, organisation, task). Subobjects are normally displayed in table format.
;[[Summary Window]]: A Summary Window displays when you open an object from the Items Pane of the IMSMA Navigation window. The Summary Window shows the most important available fields that have been selected to be included from the Data Entry Form.
==T==__NOEDITSECTION__
;TS: Technical Survey, refers to the collection and analysis of data, using appropriate technical interventions, about the presence, type, distribution and surrounding environment of mine/ERW contamination, in order to define better where mine/ERW contamination is present, and where it is not, and to support land release prioritisation and decision making processes through the provision of evidence.
==U==__NOEDITSECTION__
;UAV: Unmanned Aerial VehiclesVehicle (piloted by remote control) used for taking aerial photos of an area.
;UN: United Nations
;[[Point Types | Usage point]]: is used for Cluster munitions and other UXO. Usage point has three main types: verified target point, intended target point and firing point (both land and air);UXO: Unexploded Ordnance, explosive ordnance that has been primed, fuzed, armed or otherwise prepared for use or used. It may have been fired, dropped, launched or projected yet remains unexploded either through malfunction or design or for any other reason.
==V==__NOEDITSECTION__
==X==__NOEDITSECTION__
;xml: Extensible Markup Language (XML) is a markup language that defines a set of rules for encoding documents in a format that is both human-readable and machine-readable. The Mine Action sector has defined a schema, [[XML Documentation | maXML]], for data sharing.
==Y==__NOEDITSECTION__